If you have not already downloaded the updater please read on.
FIRST - INSTALL THE UPDATER PROGRAMME AS DETAILED BELOW - ONCE ONLY
- Select or open the link: https://www.navigationmaster.com/support/5-inch-cabbies-mate-device/updater/download
- Open 'A-Z Setup.exe' or select 'Run' in window which opens.
- When 'Security Warning Window' opens select 'Run'.
- If your computer opens a window asking you to allow the programme to make changes to your computer select 'Yes'. Depending on your operating system this window may not appear.
- When 'Updater Setup' window opens select 'Next'.
- When 'Destination Location' window opens select 'Next'.
- When 'Select Start Menu' window opens select 'Next'.
- When 'Ready to Install' window opens select 'Install'.
- When 'Completing Software Updater Setup Wizard' window opens select 'Finish'.
- 'Cabbie's Mate' Updater Software has now been successfully installed on your computer and an icon has been placed on your desktop.
- DO NOT REPEAT THESE INSTRUCTIONS - THE UPDATER IS NOW INSTALLED.
YOU ARE NOW READY TO DOWNLOAD AVAILABLE UPDATES FOR YOUR UNIT BY FOLLOWING THE INSTRUCTIONS BELOW:
- Switch on your 'Cabbie's Mate' and ensure that 'Mass Storage' is selected in 'Settings'. (more info here)
- Ensure that the 'Cabbie's Mate' screen is displayed.
- Connect device to PC using the supplied USB cable.
- 'Knowledge Master UK' window opens.
- Close 'Autoplay' window if showing on desktop.
- If device is not up to date a list of available updates will be displayed.
- To obtain or use a download code select 'Next'.
- (If you purchased your 'Cabbie's Mate' in 2013, you don't need a download code, just click on 'Next' to initiate download).
- Enter download code or select link to online store and enter 'Next' to purchase code.
- Code will be shown on your invoice sent automatically to your e-mail address - if not received after five minutes please check your 'junk mail'.
- Enter download code in box and select 'Next'.
- (If you purchased a Lifetime A-Z poi update during 2013, you only need to enter the code once. No need to enter the code for the subsequent updates, just connect your 'Cabbie's Mate' and click on 'Next' to initiate download).
- Download will commence.
Window will open after download to show it has completed. Click on 'Finish', close window and disconnect your unit.
YOUR DEVICE IS NOW UP TO DATE.
To confirm successful download please search the A-Z poi database for 'KoL Exam Office, Marylebone - 210-212 Baker Street, London, NW1 5RT' or 'Biltmore Hotel (The Biltmore), Mayfair - 44 Grosvenor Square, London, W1K 2HP'. If the point is identified, your Cabbies Mate has been updated.
Updates can also be downloaded directly onto the SD card via your computers SD card reader.